-
H3O-De Kempen - Hydrogeology - Elevation map Basis Sterksel clay 1
This elevation map represents the modeled base (mTAW) of the Sterksel clay 1. 'Elevation map Basis Sterksel clay 1' is a map layer that is part of the dataset 'H3O-De Kempen -... -
G3Dv3.1 01, isohypses of basic non-tabular Quaternary
This layer gives the isohypses of the base of the non-tabular Quaternary, as defined in the Geological 3D model of the Flemish subsurface - version 3.1. The Geological 3D model... -
H3Dv2.1 A0257, fractures in top Voort sand 2
This layer shows the fractures through the top of A0257, as defined in the Hydrogeological 3D model of the Flemish subsurface - version 2.1. The Hydrogeological 3D model has... -
G3Dv3 0321, preventing Fm van Houthem
This layer represents the occurrence boundaries of the Houthem Formation, as defined in the Geological 3D model of the Flemish subsurface. The Geological 3D model has been drawn... -
H3Dv2 A0420, isohypses of top Clay from Kleine-Spouwen
This layer gives the isohypses of the top of A0420, as defined in the Hydrogeological 3D model of the Flemish subsurface. The Hydrogeological 3D model has been drawn up in the... -
G3Dv3 020801, drilling with base Ld van Genk of the Fm van Bolderberg outside...
This layer provides the drilling through the base of the Member of Genk, as defined in the Geological 3D model of the Flemish subsoil. The Geological 3D model has been drawn up... -
Soil mechanical map 15.3.1 Antwerp-Petroleumhaven, Plate IX: Zoning (vector)
The soil mechanical maps were drawn up by the Center for Soil Mechanical Mapping of Ghent University and the Working Group or Commission for Soil Mechanical Mapping (various... -
G3Dv3 031804, isopachen Ld van Beselare van de Fm van Hannut
This layer gives the isopaches of the Member of Beselare of the Geological 3D model of Flanders. The Geological 3D model has been drawn up within the framework of the management... -
Soil mechanical map 22.1.2 Ghent-Wondelgem, Plate IV: Thickness of the Pleist...
The soil mechanical maps were drawn up by the Center for Soil Mechanical Mapping of Ghent University and the Working Group or Commission for Soil Mechanical Mapping (various... -
G3Dv3 0204, breaks in base Fm of Lillo and Powderlee
This layer represents the fractures through the base of the Lillo and Powderlee formations, as defined in the Geological 3D model of the Flemish subsurface. The Geological 3D... -
H3Dv2.1 A1102, occur Kalkarenites of Maastricht and Kunrade
This layer gives the occurrence limits of A1102, as defined in the Hydrogeological 3D model of the Flemish subsoil - version 2.1. The Hydrogeological 3D model has been drawn up... -
Potential soil erosion map per plot (2018)
The potential soil erosion map per plot (2018) shows the total potential erosion of a certain agricultural plot on the basis of a classification. The total erosion potential... -
H3O Stir Valley - Hydrogeology - Thickness BE-k-1
This layer represents the thickness (m) of BE-k-1. -
H3O-De Kempen - Hydrogeology - Elevation map Top Maassluis sand 3
This height map represents the modeled height (mTAW) of the top of the Maassluis sand 3. 'Height map Top Maassluis sand 3' is a map layer that is part of the dataset 'H3O-De... -
G3Dv3 0103, isopaches Fm van Arenberg and Stokkem
This layer gives the isopaches of the Arenberg and Stokkem formations of the Geological 3D model of Flanders. The Geological 3D model has been drawn up within the framework of... -
Soil mechanical map 22.2.3 Ghent-Sint-Amandsberg, Plate VIII: Zoning (scan or...
The soil mechanical maps were drawn up by the Center for Soil Mechanical Mapping of Ghent University and the Working Group or Commission for Soil Mechanical Mapping (various... -
Sint-Huibrechts-Hern Formation - Glauconite
This layer shows the shallow occurrence (up to 50 m below ground level) of the relevant mineral-bearing geological unit. This layer is an adaptation of the raster layer of the... -
H3Dv2 A0150, occurrence of Aeolian overburdens outside the Roer Valley Rift
This layer gives the occurrence limits of A0150, as defined in the Hydrogeological 3D model of the Flemish subsurface. The Hydrogeological 3D model has been drawn up in the... -
Soil mechanical map 15.4.3 Antwerp-Merksem-Zuid, Plate IV: Thickness of the q...
The soil mechanical maps were drawn up by the Center for Soil Mechanical Mapping of Ghent University and the Working Group or Commission for Soil Mechanical Mapping (various... -
OAv1 0205, density of drillings and cone penetration tests with Fm van Katten...
This layer provides the interpretation density of the drilling and cone penetration tests of the Kattendijk Formation, as defined in the Shallow geological 3D layer and voxel...
Μπορείτε επίσης να έχετε πρόσβαση σε αυτό το μητρώο χρησιμοποιώντας το API (δείτε API Έγγραφα).